|
Product Details:
Payment & Shipping Terms:
|
| Input Wire: | 2×Φ8.0mm | Output Wire: | 2×Φ1.3~Φ4.5mm |
|---|---|---|---|
| Max. Speed: | 25m/s | Motor: | Servo Motor |
| Bearing: | NSK | Driving: | Separate Motor |
| High Light: | Servo Motor Copper Rod Breakdown Machine,Double Wires Copper Rod Breakdown Machine |
||
Servo Motor Driving Double Wires Copper Rod Breakdown Machine with Continuous Annealing
1. Introduction
The machine is used for draw 2×Ф8.0mm copper rods to 2×(Ф1.2~Ф3.6mm) annealed copper wires.
2. Main Feature
2.1 Capstans are driven by separate servo motors directly without gears, less power consumption, less noise and easy to maintain. It can keep same performance after several years later. Compared with this new model, the speed of traditional machine will decrease because of gear abrasion.
2.2 It only needs to change the final die to adjust output wire size, the other dies no need to be changed to match gear ratio.
2.3 Traversing is driven by servo motor, it can calculate traversing speed automatically. It can traverse to left/right according to spool width without sensor, which improve traversing reliability.
2.4 The machine can save roughly 10% power compared with gear type separate motor, 20% compared with traditional single motor gear type.
3. Main Technical Specification
| Specification | HM450-13(2) | HM450-11(2) | HM450-9(2) |
| Inlet dia. | 2×Φ8mm | 2×Φ8mm | 2×Φ8mm |
| Outlet dia. | 2×Φ1.3~Φ4.5mm | 2×Φ1.7~Φ4.5mm | 2×Φ2.1~Φ4.5mm |
| Max. mechanical speed | 25m/s | 25m/s | 21m/s |
| Drawing wheel dia. | Φ450mm | Φ450mm | Φ450mm |
| Drawing motor | Servo motor | Servo motor | Servo motor |
| Fixed speed wheel motor | Servo motor | Servo motor | Servo motor |
Contact Person: Jeaham
Tel: +8615956948788
