Payment & Shipping Terms:
automatic cable winding machine,
steel wire winding machine
Wire and Cable Rewinding Machine
This rewinding line is used for circular and flat cables.
2. Main Technical Specification:
circular cable 2.0～15.0 mm
flat cable 4.0～21.0 x 10.0mm
Pay-off bobbin size
Take-up bobbin size
3. Main Parts:
3.1 Ф1600 fork type driven pay-off stand 1 set
3.2 Pay-off tension controller 1 set
3.3 Meter counter with straightener 1set
3.4 Spark tester 1set
3.5 Ф750 take-up stand with traversing(dual head) 1 set
3.6 Electrical control system 1 set
3.7 Protection system 1 set
4. Technical Specification and Structure of Main Parts:
4.1 Ф1600 fork type driven pay-off stand
Pay-off reel size
4.1.2 Max. loading weight: 4T
4.1.3 Fork type, manual bobbin clamping, electric bobbin lifting.
4.1.4 Pay-off tension is controlled by pneumatic, wire tension is 5~25kg.
4.1.5 Take-up & traversing motor
4.2 Pay-off tension controller
4.2.1 Three wheel structure, both sides for fixed wheel, middle wheel can be moved up and down, used to control the pay-off speed, and the middle wheel equipped woth the damper block, used to adjust the pay-off tension.
4.2.2Diameter of dancing wheel Ф350mm
4.2.3 Dancing wheel is made of Al, and the surface of groove is painted by ceramia.
4.2.4 Dancing wheel swings up and down to control the pay-off speed.
4.3 Meter counter with straightener
4.3.1With horizontal & vertical straightener
4.3.2Equipped with meter counter with memory function in case of power-down
4.4 Ф750 take-up stand with traversing
4.4.1 Take-up reel size PND500~PND750
4.4.2 Take-up motor 5.5kw(AC)
4.4.3 Max. Take-up speed:250m/min
4.4.4 Traversing device pulley diameter:Ф150mm
4.4.5 Column type manual lifting reel, traversing by polished rod traverse unit.
4.4.6 Pneumatic brake
5. Power supply: 3 phase 5 wires system,380V (±10%) 50HZ
5.1 Take-up motor is an AC motor from Chinese Siemens with Siemens frequency inverter control.
6. The machine has function of auto-stop at pre-set length.
7. With wire-break stop device.