Payment & Shipping Terms:
|Product Name:||Pair Cable Twisting Machine||Individual Core Wire:||0.35mm - 1.6mm|
|Max Linear Speed:||160mm||Control System:||PLC Automatic Control System|
|Lay Length Range:||4~80mm||Back Twist Rate:||100% Torsion Free|
double twist bunching machine,
cable bunching machine
Automatic High Speed Pair Cable Twisting Machine For Data Cable
Double twist operate easily and the speed reach up to 5000 TPM and twist deviation is less than 0.5mm.
It is suitable for twisting LAN cable cat 5/5e/5+/6 with less than 350 Mhz.
The pay-off device adopts frequency regulation speed active pay-off,it is controlled by frequency regulation speed and control core wire tension by the feedback of high-sensitivity tension oscillating rod,
thus, can be ensure the tension is uniformity.
Take-up tension is controlled by low inertia high-sensitivity electromagnetic powder clutch (Mitsubishi) and programmable logic controller (PLC), can be ensure the tension is uniformity.
The whole machine adopts precision control, therefore, can make resistance unbalance and capacitance unbalance of wire reducing to the least, make date cable up to excellent electric appliance performance.
|Conductor diameter||0.40 〜0.65mm|
|Max insulation diameter||2.60mm|
|Max twist diameter||5.20mm|
|Twist pitch range||10〜30mm ( every other 0 .5mm is one grade, change gear)|
|Bow rotate speed||250〜2500RPM ( stepless adjustable)|
|Max line speed||150 m/m in|
|Twist direction||Left or right|
|Main motor power||7.5KW 380V Three-phase AC motor,frequency conversion|
|Pay-off bobbin||500(Outer diameter)X250(barrel diameter)X250(inner width) X56mm(shaft hole)|
|Take-up bobbin||500(Outer diameter)X250(barrel diameter)X250(inner width) X56mm(shaft hole)|
|Take-up bobbin lifting||Gear reducer motor lifting|
|Operating direction||From left to right or from right to left|
Contact Person: April